Dodany przez: urbinek, 11:31 02-10-2012

Nowy Pobierz
  1. [18925.681206] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
  2. [18925.681217] ata2: irq_stat 0x00000040, connection status changed
  3. [18925.681225] ata2: SError: { DevExch }
  4. [18925.681241] ata2: hard resetting link
  5. [18934.864179] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  6. [18935.110289] ata2.00: ATA-8: WDC WD7500BPVT-22HXZT1, 01.01A01, max UDMA/133
  7. [18935.110299] ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  8. [18935.117018] ata2.00: configured for UDMA/133
  9. [18935.132072] ata2: EH complete
  10. [18935.132596] scsi 1:0:0:0: Direct-Access     ATA      WDC WD7500BPVT-2 01.0 PQ: 0 ANSI: 5
  11. [18935.133099] sd 1:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
  12. [18935.133106] sd 1:0:0:0: [sdc] 4096-byte physical blocks
  13. [18935.133210] sd 1:0:0:0: [sdc] Write Protect is off
  14. [18935.133217] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  15. [18935.133262] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  16. [18935.144087]  sdc: sdc1 sdc2 sdc3
  17. [18935.145963] sd 1:0:0:0: [sdc] Attached SCSI disk
  18. [18957.501186] ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
  19. [18957.501196] ata2.00: irq_stat 0x48000000
  20. [18957.501205] ata2.00: failed command: READ FPDMA QUEUED
  21. [18957.501221] ata2.00: cmd 60/08:00:80:07:9f/00:00:24:00:00/40 tag 0 ncq 4096 in
  22. [18957.501224]          res 41/04:00:80:07:9f/00:00:24:00:00/40 Emask 0x401 (device error) <F>
  23. [18957.501231] ata2.00: status: { DRDY ERR }
  24. [18957.501236] ata2.00: error: { ABRT }
  25. [18957.511431] ata2.00: configured for UDMA/133
  26. [18957.511463] ata2: EH complete
  27. [18959.279661] ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
  28. [18959.279672] ata2.00: irq_stat 0x48000000
  29. [18959.279680] ata2.00: failed command: READ FPDMA QUEUED
  30. [18959.279697] ata2.00: cmd 60/08:00:80:07:9f/00:00:24:00:00/40 tag 0 ncq 4096 in
  31. [18959.279700]          res 41/04:00:80:07:9f/00:00:24:00:00/40 Emask 0x401 (device error) <F>
  32. [18959.279714] ata2.00: status: { DRDY ERR }
  33. [18959.279719] ata2.00: error: { ABRT }
  34. [18959.289455] ata2.00: configured for UDMA/133
  35. [18959.289482] ata2: EH complete
  36. [18960.691582] ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
  37. [18960.691594] ata2.00: irq_stat 0x48000000
  38. [18960.691602] ata2.00: failed command: READ FPDMA QUEUED
  39. [18960.691618] ata2.00: cmd 60/08:00:80:07:9f/00:00:24:00:00/40 tag 0 ncq 4096 in
  40. [18960.691622]          res 41/04:00:80:07:9f/00:00:24:00:00/40 Emask 0x401 (device error) <F>
  41. [18960.691629] ata2.00: status: { DRDY ERR }
  42. [18960.691634] ata2.00: error: { ABRT }
  43. [18960.703548] ata2.00: configured for UDMA/133
  44. [18960.703577] ata2: EH complete
  45. [18962.503279] ata2.00: NCQ disabled due to excessive errors
  46. [18962.503292] ata2.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
  47. [18962.503299] ata2.00: irq_stat 0x48000000
  48. [18962.503307] ata2.00: failed command: READ FPDMA QUEUED
  49. [18962.503322] ata2.00: cmd 60/08:00:80:07:9f/00:00:24:00:00/40 tag 0 ncq 4096 in
  50. [18962.503326]          res 41/04:00:80:07:9f/00:00:24:00:00/40 Emask 0x401 (device error) <F>
  51. [18962.503333] ata2.00: status: { DRDY ERR }
  52. [18962.503338] ata2.00: error: { ABRT }
  53. [18962.514506] ata2.00: configured for UDMA/133
  54. [18962.514534] ata2: EH complete
  55. [18963.661904] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  56. [18963.661942] ata2.00: irq_stat 0x48000000
  57. [18963.661950] ata2.00: failed command: READ DMA EXT
  58. [18963.661966] ata2.00: cmd 25/00:08:80:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  59. [18963.661969]          res 41/04:00:80:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  60. [18963.661976] ata2.00: status: { DRDY ERR }
  61. [18963.661981] ata2.00: error: { ABRT }
  62. [18963.668816] ata2.00: configured for UDMA/133
  63. [18963.668847] ata2: EH complete
  64. [18964.063507] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  65. [18964.063517] ata2.00: irq_stat 0x48000000
  66. [18964.063525] ata2.00: failed command: READ DMA EXT
  67. [18964.063541] ata2.00: cmd 25/00:08:80:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  68. [18964.063544]          res 41/04:00:80:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  69. [18964.063551] ata2.00: status: { DRDY ERR }
  70. [18964.063556] ata2.00: error: { ABRT }
  71. [18964.070399] ata2.00: configured for UDMA/133
  72. [18964.070430] sd 1:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  73. [18964.070439] sd 1:0:0:0: [sdc]  Sense Key : Aborted Command [current] [descriptor]
  74. [18964.070448] Descriptor sense data with sense descriptors (in hex):
  75. [18964.070453]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  76. [18964.070469]         24 9f 07 80
  77. [18964.070477] sd 1:0:0:0: [sdc]  Add. Sense: No additional sense information
  78. [18964.070486] sd 1:0:0:0: [sdc] CDB: Read(10): 28 00 24 9f 07 80 00 00 08 00
  79. [18964.070502] end_request: I/O error, dev sdc, sector 614401920
  80. [18964.070514] Buffer I/O error on device sdc2, logical block 76774384
  81. [18964.070565] ata2: EH complete
  82. [18964.408008] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  83. [18964.408050] ata2.00: irq_stat 0x48000000
  84. [18964.408058] ata2.00: failed command: READ DMA EXT
  85. [18964.408074] ata2.00: cmd 25/00:08:80:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  86. [18964.408077]          res 41/04:00:80:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  87. [18964.408084] ata2.00: status: { DRDY ERR }
  88. [18964.408090] ata2.00: error: { ABRT }
  89. [18964.414892] ata2.00: configured for UDMA/133
  90. [18964.414915] ata2: EH complete
  91. [18964.759510] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  92. [18964.759520] ata2.00: irq_stat 0x48000000
  93. [18964.759529] ata2.00: failed command: READ DMA EXT
  94. [18964.759544] ata2.00: cmd 25/00:08:80:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  95. [18964.759547]          res 41/04:00:80:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  96. [18964.759554] ata2.00: status: { DRDY ERR }
  97. [18964.759559] ata2.00: error: { ABRT }
  98. [18964.766420] ata2.00: configured for UDMA/133
  99. [18964.766448] ata2: EH complete
  100. [18965.114037] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  101. [18965.114048] ata2.00: irq_stat 0x48000000
  102. [18965.114056] ata2.00: failed command: READ DMA EXT
  103. [18965.114071] ata2.00: cmd 25/00:08:80:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  104. [18965.114075]          res 41/04:00:80:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  105. [18965.114082] ata2.00: status: { DRDY ERR }
  106. [18965.114087] ata2.00: error: { ABRT }
  107. [18965.122801] ata2.00: configured for UDMA/133
  108. [18965.122831] ata2: EH complete
  109. [18965.381006] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x190001 action 0xe frozen
  110. [18965.381017] ata2.00: irq_stat 0x00400000, PHY RDY changed
  111. [18965.381026] ata2: SError: { RecovData PHYRdyChg 10B8B Dispar }
  112. [18965.381034] ata2.00: failed command: READ DMA EXT
  113. [18965.381050] ata2.00: cmd 25/00:08:80:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  114. [18965.381053]          res 50/00:02:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error)
  115. [18965.381060] ata2.00: status: { DRDY }
  116. [18965.381072] ata2: hard resetting link
  117. [18966.104409] ata2: SATA link down (SStatus 0 SControl 300)
  118. [18971.105382] ata2: hard resetting link
  119. [18971.424069] ata2: SATA link down (SStatus 0 SControl 300)
  120. [18971.424086] ata2: limiting SATA link speed to 1.5 Gbps
  121. [18976.424054] ata2: hard resetting link
  122. [18976.744072] ata2: SATA link down (SStatus 0 SControl 310)
  123. [18976.744149] ata2.00: disabled
  124. [18976.760087] sd 1:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  125. [18976.760100] sd 1:0:0:0: [sdc]  Sense Key : Aborted Command [current] [descriptor]
  126. [18976.760110] Descriptor sense data with sense descriptors (in hex):
  127. [18976.760115]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  128. [18976.760131]         00 00 00 00
  129. [18976.760139] sd 1:0:0:0: [sdc]  Add. Sense: No additional sense information
  130. [18976.760148] sd 1:0:0:0: [sdc] CDB: Read(10): 28 00 24 9f 07 80 00 00 08 00
  131. [18976.760164] end_request: I/O error, dev sdc, sector 614401920
  132. [18976.760175] Buffer I/O error on device sdc2, logical block 76774384
  133. [18976.760213] sd 1:0:0:0: rejecting I/O to offline device
  134. [18976.760219] sd 1:0:0:0: killing request
  135. [18976.760227] sd 1:0:0:0: rejecting I/O to offline device
  136. [18976.760233] sd 1:0:0:0: [sdc] killing request
  137. [18976.760244] ata2: EH complete
  138. [18976.760709] sd 1:0:0:0: [sdc] Unhandled error code
  139. [18976.760715] sd 1:0:0:0: [sdc]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
  140. [18976.760722] sd 1:0:0:0: [sdc] CDB: Read(10): 28 00 57 54 57 80 00 00 08 00
  141. [18976.760738] end_request: I/O error, dev sdc, sector 1465145216
  142. [18976.760745] Buffer I/O error on device sdc3, logical block 106342896
  143. [18976.760758] sd 1:0:0:0: rejecting I/O to offline device
  144. [18976.760799] sd 1:0:0:0: rejecting I/O to offline device
  145. [18976.760819] sd 1:0:0:0: rejecting I/O to offline device
  146. [18976.760828] sd 1:0:0:0: [sdc] Asking for cache data failed
  147. [18976.760834] sd 1:0:0:0: [sdc] Assuming drive cache: write through
  148. [18976.760892] sd 1:0:0:0: rejecting I/O to offline device
  149. [18976.760984] sd 1:0:0:0: rejecting I/O to offline device
  150. [18976.761004] sd 1:0:0:0: rejecting I/O to offline device
  151. [18976.761029] sd 1:0:0:0: rejecting I/O to offline device
  152. [18976.761044] sd 1:0:0:0: rejecting I/O to offline device
  153. [18976.761077] sd 1:0:0:0: rejecting I/O to offline device
  154. [18976.761103] sd 1:0:0:0: rejecting I/O to offline device
  155. [18976.761129] sd 1:0:0:0: rejecting I/O to offline device
  156. [18976.761525] sd 1:0:0:0: rejecting I/O to offline device
  157. [18976.761549] sd 1:0:0:0: rejecting I/O to offline device
  158. [18976.761586] sd 1:0:0:0: rejecting I/O to offline device
  159. [18976.761608] sd 1:0:0:0: rejecting I/O to offline device
  160. [18976.761628] sd 1:0:0:0: rejecting I/O to offline device
  161. [18976.761648] sd 1:0:0:0: rejecting I/O to offline device
  162. [18976.761668] sd 1:0:0:0: rejecting I/O to offline device
  163. [18976.761689] sd 1:0:0:0: rejecting I/O to offline device
  164. [18976.761709] sd 1:0:0:0: rejecting I/O to offline device
  165. [18976.761729] sd 1:0:0:0: rejecting I/O to offline device
  166. [18976.761753] sd 1:0:0:0: rejecting I/O to offline device
  167. [18976.761766] sd 1:0:0:0: rejecting I/O to offline device
  168. [18976.761797] ata2.00: detaching (SCSI 1:0:0:0)
  169. [18976.769079] sd 1:0:0:0: [sdc] Stopping disk
  170. [18976.769152] sd 1:0:0:0: [sdc] START_STOP FAILED
  171. [18976.769157] sd 1:0:0:0: [sdc]  Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
  172. [18976.769284] Buffer I/O error on device sdc1, logical block 1
  173. [18976.769307] Buffer I/O error on device sdc1, logical block 25599
  174. [18976.769514] Buffer I/O error on device sdc1, logical block 1
  175. [18976.769526] Buffer I/O error on device sdc1, logical block 1
  176. [18976.769575] Buffer I/O error on device sdc1, logical block 25599
  177. [18976.769631] Buffer I/O error on device sdc1, logical block 256
  178. [18976.769708] Buffer I/O error on device sdc1, logical block 1
  179. [19002.322552] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
  180. [19002.322562] ata2: irq_stat 0x00000040, connection status changed
  181. [19002.322570] ata2: SError: { DevExch }
  182. [19002.322586] ata2: hard resetting link
  183. [19003.772069] ata2: SATA link down (SStatus 1 SControl 300)
  184. [19003.788073] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen t4
  185. [19003.788084] ata2: irq_stat 0x00000040, connection status changed
  186. [19003.788092] ata2: SError: { DevExch }
  187. [19003.788107] ata2: limiting SATA link speed to 1.5 Gbps
  188. [19003.788115] ata2: hard resetting link
  189. [19006.016051] ata2: SATA link down (SStatus 1 SControl 310)
  190. [19006.032054] ata2: EH complete
  191. [19007.116121] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
  192. [19007.116132] ata2: irq_stat 0x00000040, connection status changed
  193. [19007.116139] ata2: SError: { DevExch }
  194. [19007.116154] ata2: limiting SATA link speed to 1.5 Gbps
  195. [19007.116162] ata2: hard resetting link
  196. [19009.344057] ata2: SATA link down (SStatus 1 SControl 310)
  197. [19009.360114] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen t4
  198. [19009.360125] ata2: irq_stat 0x00000040, connection status changed
  199. [19009.360133] ata2: SError: { DevExch }
  200. [19009.360148] ata2: limiting SATA link speed to 1.5 Gbps
  201. [19009.360155] ata2: hard resetting link
  202. [19010.084074] ata2: SATA link down (SStatus 0 SControl 310)
  203. [19010.101797] ata2: EH complete
  204. [19028.755180] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4000000 action 0xe frozen
  205. [19028.755191] ata2: irq_stat 0x00000040, connection status changed
  206. [19028.755199] ata2: SError: { DevExch }
  207. [19028.755214] ata2: limiting SATA link speed to 1.5 Gbps
  208. [19028.755222] ata2: hard resetting link
  209. [19038.776053] ata2: softreset failed (device not ready)
  210. [19038.776067] ata2: hard resetting link
  211. [19048.800061] ata2: softreset failed (device not ready)
  212. [19048.800076] ata2: hard resetting link
  213. [19055.744063] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  214. [19056.908112] ata2.00: ATA-8: WDC WD7500BPVT-22HXZT1, 01.01A01, max UDMA/133
  215. [19056.908123] ata2.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
  216. [19056.912198] ata2.00: configured for UDMA/133
  217. [19056.928059] ata2: EH complete
  218. [19056.928309] scsi 1:0:0:0: Direct-Access     ATA      WDC WD7500BPVT-2 01.0 PQ: 0 ANSI: 5
  219. [19056.928826] sd 1:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
  220. [19056.928836] sd 1:0:0:0: [sdc] 4096-byte physical blocks
  221. [19056.928962] sd 1:0:0:0: [sdc] Write Protect is off
  222. [19056.928969] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  223. [19056.929015] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  224. [19056.941739]  sdc: sdc1 sdc2 sdc3
  225. [19056.942512] sd 1:0:0:0: [sdc] Attached SCSI disk
  226. [19058.788725] ata2.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
  227. [19058.788735] ata2.00: irq_stat 0x48000000
  228. [19058.788744] ata2.00: failed command: READ FPDMA QUEUED
  229. [19058.788760] ata2.00: cmd 60/08:08:80:07:9f/00:00:24:00:00/40 tag 1 ncq 4096 in
  230. [19058.788763]          res 41/04:00:80:07:9f/00:00:24:00:00/40 Emask 0x401 (device error) <F>
  231. [19058.788771] ata2.00: status: { DRDY ERR }
  232. [19058.788776] ata2.00: error: { ABRT }
  233. [19058.798471] ata2.00: configured for UDMA/133
  234. [19058.798495] ata2: EH complete
  235. [19059.511152] ata2.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
  236. [19059.511163] ata2.00: irq_stat 0x48000000
  237. [19059.511172] ata2.00: failed command: READ FPDMA QUEUED
  238. [19059.511189] ata2.00: cmd 60/08:00:80:07:9f/00:00:24:00:00/40 tag 0 ncq 4096 in
  239. [19059.511192]          res 41/04:00:80:07:9f/00:00:24:00:00/40 Emask 0x401 (device error) <F>
  240. [19059.511200] ata2.00: status: { DRDY ERR }
  241. [19059.511205] ata2.00: error: { ABRT }
  242. [19059.519610] ata2.00: configured for UDMA/133
  243. [19059.519640] ata2: EH complete
  244. [19060.233643] ata2.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
  245. [19060.233647] ata2.00: irq_stat 0x48000000
  246. [19060.233650] ata2.00: failed command: READ FPDMA QUEUED
  247. [19060.233656] ata2.00: cmd 60/08:08:80:07:9f/00:00:24:00:00/40 tag 1 ncq 4096 in
  248. [19060.233657]          res 41/04:00:80:07:9f/00:00:24:00:00/40 Emask 0x401 (device error) <F>
  249. [19060.233660] ata2.00: status: { DRDY ERR }
  250. [19060.233661] ata2.00: error: { ABRT }
  251. [19060.243574] ata2.00: configured for UDMA/133
  252. [19060.243588] ata2: EH complete
  253. [19060.945145] ata2.00: NCQ disabled due to excessive errors
  254. [19060.945159] ata2.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x0
  255. [19060.945167] ata2.00: irq_stat 0x48000000
  256. [19060.945175] ata2.00: failed command: READ FPDMA QUEUED
  257. [19060.945191] ata2.00: cmd 60/08:00:80:07:9f/00:00:24:00:00/40 tag 0 ncq 4096 in
  258. [19060.945195]          res 41/04:00:80:07:9f/00:00:24:00:00/40 Emask 0x401 (device error) <F>
  259. [19060.945202] ata2.00: status: { DRDY ERR }
  260. [19060.945207] ata2.00: error: { ABRT }
  261. [19060.954666] ata2.00: configured for UDMA/133
  262. [19060.954694] ata2: EH complete
  263. [19061.212093] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  264. [19061.212126] ata2.00: irq_stat 0x48000000
  265. [19061.212134] ata2.00: failed command: READ DMA EXT
  266. [19061.212150] ata2.00: cmd 25/00:08:00:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  267. [19061.212153]          res 41/04:00:00:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  268. [19061.212161] ata2.00: status: { DRDY ERR }
  269. [19061.212166] ata2.00: error: { ABRT }
  270. [19061.218994] ata2.00: configured for UDMA/133
  271. [19061.219015] ata2: EH complete
  272. [19061.878136] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  273. [19061.878147] ata2.00: irq_stat 0x48000000
  274. [19061.878155] ata2.00: failed command: READ DMA EXT
  275. [19061.878171] ata2.00: cmd 25/00:08:00:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  276. [19061.878174]          res 41/04:00:00:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  277. [19061.878181] ata2.00: status: { DRDY ERR }
  278. [19061.878186] ata2.00: error: { ABRT }
  279. [19061.891454] ata2.00: configured for UDMA/133
  280. [19061.891481] ata2: EH complete
  281. [19062.265632] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  282. [19062.265642] ata2.00: irq_stat 0x48000000
  283. [19062.265650] ata2.00: failed command: READ DMA EXT
  284. [19062.265666] ata2.00: cmd 25/00:08:00:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  285. [19062.265669]          res 41/04:00:00:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  286. [19062.265677] ata2.00: status: { DRDY ERR }
  287. [19062.265682] ata2.00: error: { ABRT }
  288. [19062.279125] ata2.00: configured for UDMA/133
  289. [19062.279151] ata2: EH complete
  290. [19062.645195] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  291. [19062.645205] ata2.00: irq_stat 0x48000000
  292. [19062.645214] ata2.00: failed command: READ DMA EXT
  293. [19062.645229] ata2.00: cmd 25/00:08:00:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  294. [19062.645232]          res 41/04:00:00:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  295. [19062.645240] ata2.00: status: { DRDY ERR }
  296. [19062.645245] ata2.00: error: { ABRT }
  297. [19062.658550] ata2.00: configured for UDMA/133
  298. [19062.658577] ata2: EH complete
  299. [19063.033770] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  300. [19063.033781] ata2.00: irq_stat 0x48000000
  301. [19063.033789] ata2.00: failed command: READ DMA EXT
  302. [19063.033805] ata2.00: cmd 25/00:08:00:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  303. [19063.033808]          res 41/04:00:00:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  304. [19063.033815] ata2.00: status: { DRDY ERR }
  305. [19063.033820] ata2.00: error: { ABRT }
  306. [19063.047173] ata2.00: configured for UDMA/133
  307. [19063.047210] sd 1:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  308. [19063.047219] sd 1:0:0:0: [sdc]  Sense Key : Aborted Command [current] [descriptor]
  309. [19063.047228] Descriptor sense data with sense descriptors (in hex):
  310. [19063.047232]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  311. [19063.047249]         24 9f 08 00
  312. [19063.047256] sd 1:0:0:0: [sdc]  Add. Sense: No additional sense information
  313. [19063.047265] sd 1:0:0:0: [sdc] CDB: Read(10): 28 00 24 9f 08 00 00 00 08 00
  314. [19063.047281] end_request: I/O error, dev sdc, sector 614402048
  315. [19063.047291] quiet_error: 90 callbacks suppressed
  316. [19063.047298] Buffer I/O error on device sdc3, logical block 0
  317. [19063.047346] ata2: EH complete
  318. [19063.423339] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  319. [19063.423351] ata2.00: irq_stat 0x48000000
  320. [19063.423359] ata2.00: failed command: READ DMA EXT
  321. [19063.423375] ata2.00: cmd 25/00:08:80:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  322. [19063.423378]          res 41/04:00:80:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  323. [19063.423386] ata2.00: status: { DRDY ERR }
  324. [19063.423391] ata2.00: error: { ABRT }
  325. [19063.436672] ata2.00: configured for UDMA/133
  326. [19063.436702] ata2: EH complete
  327. [19063.811905] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  328. [19063.811915] ata2.00: irq_stat 0x48000000
  329. [19063.811924] ata2.00: failed command: READ DMA EXT
  330. [19063.811940] ata2.00: cmd 25/00:08:80:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  331. [19063.811943]          res 41/04:00:80:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  332. [19063.811950] ata2.00: status: { DRDY ERR }
  333. [19063.811956] ata2.00: error: { ABRT }
  334. [19063.825340] ata2.00: configured for UDMA/133
  335. [19063.825371] sd 1:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  336. [19063.825380] sd 1:0:0:0: [sdc]  Sense Key : Aborted Command [current] [descriptor]
  337. [19063.825390] Descriptor sense data with sense descriptors (in hex):
  338. [19063.825394]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  339. [19063.825411]         24 9f 07 80
  340. [19063.825419] sd 1:0:0:0: [sdc]  Add. Sense: No additional sense information
  341. [19063.825428] sd 1:0:0:0: [sdc] CDB: Read(10): 28 00 24 9f 07 80 00 00 08 00
  342. [19063.825444] end_request: I/O error, dev sdc, sector 614401920
  343. [19063.825455] Buffer I/O error on device sdc2, logical block 76774384
  344. [19063.825507] ata2: EH complete
  345. [19064.201476] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  346. [19064.201487] ata2.00: irq_stat 0x48000000
  347. [19064.201495] ata2.00: failed command: READ DMA EXT
  348. [19064.201511] ata2.00: cmd 25/00:08:00:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  349. [19064.201514]          res 41/04:00:00:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  350. [19064.201521] ata2.00: status: { DRDY ERR }
  351. [19064.201527] ata2.00: error: { ABRT }
  352. [19064.214801] ata2.00: configured for UDMA/133
  353. [19064.214826] ata2: EH complete
  354. [19064.590048] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  355. [19064.590059] ata2.00: irq_stat 0x48000000
  356. [19064.590067] ata2.00: failed command: READ DMA EXT
  357. [19064.590083] ata2.00: cmd 25/00:08:00:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  358. [19064.590086]          res 41/04:00:00:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  359. [19064.590094] ata2.00: status: { DRDY ERR }
  360. [19064.590099] ata2.00: error: { ABRT }
  361. [19064.603442] ata2.00: configured for UDMA/133
  362. [19064.603466] ata2: EH complete
  363. [19064.979618] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  364. [19064.979630] ata2.00: irq_stat 0x48000000
  365. [19064.979638] ata2.00: failed command: READ DMA EXT
  366. [19064.979654] ata2.00: cmd 25/00:08:00:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  367. [19064.979657]          res 41/04:00:00:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  368. [19064.979665] ata2.00: status: { DRDY ERR }
  369. [19064.979670] ata2.00: error: { ABRT }
  370. [19064.992960] ata2.00: configured for UDMA/133
  371. [19064.992985] ata2: EH complete
  372. [19065.369198] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  373. [19065.369209] ata2.00: irq_stat 0x48000000
  374. [19065.369216] ata2.00: failed command: READ DMA EXT
  375. [19065.369232] ata2.00: cmd 25/00:08:00:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  376. [19065.369235]          res 41/04:00:00:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  377. [19065.369243] ata2.00: status: { DRDY ERR }
  378. [19065.369248] ata2.00: error: { ABRT }
  379. [19065.382623] ata2.00: configured for UDMA/133
  380. [19065.382652] ata2: EH complete
  381. [19065.759761] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  382. [19065.759771] ata2.00: irq_stat 0x48000000
  383. [19065.759780] ata2.00: failed command: READ DMA EXT
  384. [19065.759795] ata2.00: cmd 25/00:08:00:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  385. [19065.759799]          res 41/04:00:00:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  386. [19065.759806] ata2.00: status: { DRDY ERR }
  387. [19065.759811] ata2.00: error: { ABRT }
  388. [19065.773082] ata2.00: configured for UDMA/133
  389. [19065.773108] ata2: EH complete
  390. [19066.148330] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  391. [19066.148340] ata2.00: irq_stat 0x48000000
  392. [19066.148348] ata2.00: failed command: READ DMA EXT
  393. [19066.148364] ata2.00: cmd 25/00:08:00:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  394. [19066.148367]          res 41/04:00:00:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  395. [19066.148374] ata2.00: status: { DRDY ERR }
  396. [19066.148379] ata2.00: error: { ABRT }
  397. [19066.162830] ata2.00: configured for UDMA/133
  398. [19066.162869] sd 1:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  399. [19066.162878] sd 1:0:0:0: [sdc]  Sense Key : Aborted Command [current] [descriptor]
  400. [19066.162887] Descriptor sense data with sense descriptors (in hex):
  401. [19066.162892]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  402. [19066.162908]         24 9f 08 00
  403. [19066.162916] sd 1:0:0:0: [sdc]  Add. Sense: No additional sense information
  404. [19066.162926] sd 1:0:0:0: [sdc] CDB: Read(10): 28 00 24 9f 08 00 00 00 08 00
  405. [19066.162951] end_request: I/O error, dev sdc, sector 614402048
  406. [19066.162962] Buffer I/O error on device sdc3, logical block 0
  407. [19066.163011] ata2: EH complete
  408. [19066.535907] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  409. [19066.535919] ata2.00: irq_stat 0x48000000
  410. [19066.535927] ata2.00: failed command: READ DMA EXT
  411. [19066.535943] ata2.00: cmd 25/00:08:80:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  412. [19066.535946]          res 41/04:00:80:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  413. [19066.535954] ata2.00: status: { DRDY ERR }
  414. [19066.535959] ata2.00: error: { ABRT }
  415. [19066.549221] ata2.00: configured for UDMA/133
  416. [19066.549247] ata2: EH complete
  417. [19066.925469] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  418. [19066.925480] ata2.00: irq_stat 0x48000000
  419. [19066.925488] ata2.00: failed command: READ DMA EXT
  420. [19066.925504] ata2.00: cmd 25/00:08:80:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  421. [19066.925508]          res 41/04:00:80:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  422. [19066.925515] ata2.00: status: { DRDY ERR }
  423. [19066.925520] ata2.00: error: { ABRT }
  424. [19066.938867] ata2.00: configured for UDMA/133
  425. [19066.938894] ata2: EH complete
  426. [19067.314087] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  427. [19067.314098] ata2.00: irq_stat 0x48000000
  428. [19067.314106] ata2.00: failed command: READ DMA EXT
  429. [19067.314122] ata2.00: cmd 25/00:08:80:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  430. [19067.314126]          res 41/04:00:80:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  431. [19067.314133] ata2.00: status: { DRDY ERR }
  432. [19067.314138] ata2.00: error: { ABRT }
  433. [19067.327445] ata2.00: configured for UDMA/133
  434. [19067.327476] ata2: EH complete
  435. [19067.704616] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  436. [19067.704627] ata2.00: irq_stat 0x48000000
  437. [19067.704636] ata2.00: failed command: READ DMA EXT
  438. [19067.704651] ata2.00: cmd 25/00:08:80:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  439. [19067.704655]          res 41/04:00:80:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  440. [19067.704662] ata2.00: status: { DRDY ERR }
  441. [19067.704667] ata2.00: error: { ABRT }
  442. [19067.718018] ata2.00: configured for UDMA/133
  443. [19067.718044] ata2: EH complete
  444. [19068.693063] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  445. [19068.693074] ata2.00: irq_stat 0x48000000
  446. [19068.693082] ata2.00: failed command: READ DMA EXT
  447. [19068.693098] ata2.00: cmd 25/00:08:80:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  448. [19068.693101]          res 41/04:00:80:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  449. [19068.693109] ata2.00: status: { DRDY ERR }
  450. [19068.693114] ata2.00: error: { ABRT }
  451. [19068.706450] ata2.00: configured for UDMA/133
  452. [19068.706480] ata2: EH complete
  453. [19069.082640] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  454. [19069.082650] ata2.00: irq_stat 0x48000000
  455. [19069.082658] ata2.00: failed command: READ DMA EXT
  456. [19069.082674] ata2.00: cmd 25/00:08:80:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  457. [19069.082677]          res 41/04:00:80:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  458. [19069.082684] ata2.00: status: { DRDY ERR }
  459. [19069.082689] ata2.00: error: { ABRT }
  460. [19069.101728] ata2.00: configured for UDMA/133
  461. [19069.101765] sd 1:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  462. [19069.101774] sd 1:0:0:0: [sdc]  Sense Key : Aborted Command [current] [descriptor]
  463. [19069.101783] Descriptor sense data with sense descriptors (in hex):
  464. [19069.101788]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  465. [19069.101804]         24 9f 07 80
  466. [19069.101812] sd 1:0:0:0: [sdc]  Add. Sense: No additional sense information
  467. [19069.101821] sd 1:0:0:0: [sdc] CDB: Read(10): 28 00 24 9f 07 80 00 00 08 00
  468. [19069.101837] end_request: I/O error, dev sdc, sector 614401920
  469. [19069.101849] Buffer I/O error on device sdc2, logical block 76774384
  470. [19069.101891] ata2: EH complete
  471. [19069.916857] ata2.00: limiting speed to UDMA/100:PIO4
  472. [19069.916871] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
  473. [19069.916879] ata2.00: irq_stat 0x48000000
  474. [19069.916887] ata2.00: failed command: READ DMA EXT
  475. [19069.916903] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  476. [19069.916906]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  477. [19069.916913] ata2.00: status: { DRDY ERR }
  478. [19069.916919] ata2.00: error: { ABRT }
  479. [19069.916931] ata2: hard resetting link
  480. [19078.137968] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  481. [19078.148723] ata2.00: configured for UDMA/100
  482. [19078.164096] ata2: EH complete
  483. [19078.577555] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  484. [19078.577566] ata2.00: irq_stat 0x48000000
  485. [19078.577575] ata2.00: failed command: READ DMA EXT
  486. [19078.577590] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  487. [19078.577594]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  488. [19078.577602] ata2.00: status: { DRDY ERR }
  489. [19078.577607] ata2.00: error: { ABRT }
  490. [19078.590900] ata2.00: configured for UDMA/100
  491. [19078.590926] ata2: EH complete
  492. [19078.967140] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  493. [19078.967151] ata2.00: irq_stat 0x48000000
  494. [19078.967159] ata2.00: failed command: READ DMA EXT
  495. [19078.967176] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  496. [19078.967179]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  497. [19078.967186] ata2.00: status: { DRDY ERR }
  498. [19078.967191] ata2.00: error: { ABRT }
  499. [19078.980553] ata2.00: configured for UDMA/100
  500. [19078.980580] ata2: EH complete
  501. [19079.355704] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  502. [19079.355715] ata2.00: irq_stat 0x48000000
  503. [19079.355723] ata2.00: failed command: READ DMA EXT
  504. [19079.355739] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  505. [19079.355742]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  506. [19079.355750] ata2.00: status: { DRDY ERR }
  507. [19079.355755] ata2.00: error: { ABRT }
  508. [19079.369117] ata2.00: configured for UDMA/100
  509. [19079.369147] ata2: EH complete
  510. [19079.744251] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  511. [19079.744261] ata2.00: irq_stat 0x48000000
  512. [19079.744269] ata2.00: failed command: READ DMA EXT
  513. [19079.744285] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  514. [19079.744288]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  515. [19079.744296] ata2.00: status: { DRDY ERR }
  516. [19079.744301] ata2.00: error: { ABRT }
  517. [19079.758184] ata2.00: configured for UDMA/100
  518. [19079.758213] ata2: EH complete
  519. [19080.133832] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  520. [19080.133843] ata2.00: irq_stat 0x48000000
  521. [19080.133851] ata2.00: failed command: READ DMA EXT
  522. [19080.133866] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  523. [19080.133869]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  524. [19080.133877] ata2.00: status: { DRDY ERR }
  525. [19080.133882] ata2.00: error: { ABRT }
  526. [19080.147850] ata2.00: configured for UDMA/100
  527. [19080.147889] sd 1:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  528. [19080.147897] sd 1:0:0:0: [sdc]  Sense Key : Aborted Command [current] [descriptor]
  529. [19080.147907] Descriptor sense data with sense descriptors (in hex):
  530. [19080.147911]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  531. [19080.147927]         24 9f 08 08
  532. [19080.147935] sd 1:0:0:0: [sdc]  Add. Sense: No additional sense information
  533. [19080.147944] sd 1:0:0:0: [sdc] CDB: Read(10): 28 00 24 9f 08 08 00 00 08 00
  534. [19080.147960] end_request: I/O error, dev sdc, sector 614402056
  535. [19080.147972] Buffer I/O error on device sdc3, logical block 1
  536. [19080.148100] ata2: EH complete
  537. [19080.524404] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  538. [19080.524414] ata2.00: irq_stat 0x48000000
  539. [19080.524422] ata2.00: failed command: READ DMA EXT
  540. [19080.524438] ata2.00: cmd 25/00:08:f0:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  541. [19080.524442]          res 41/04:00:f0:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  542. [19080.524449] ata2.00: status: { DRDY ERR }
  543. [19080.524454] ata2.00: error: { ABRT }
  544. [19080.537838] ata2.00: configured for UDMA/100
  545. [19080.537869] ata2: EH complete
  546. [19080.911978] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  547. [19080.911989] ata2.00: irq_stat 0x48000000
  548. [19080.911997] ata2.00: failed command: READ DMA EXT
  549. [19080.912048] ata2.00: cmd 25/00:08:f0:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  550. [19080.912051]          res 41/04:00:f0:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  551. [19080.912058] ata2.00: status: { DRDY ERR }
  552. [19080.912064] ata2.00: error: { ABRT }
  553. [19080.925304] ata2.00: configured for UDMA/100
  554. [19080.925332] ata2: EH complete
  555. [19081.301544] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  556. [19081.301555] ata2.00: irq_stat 0x48000000
  557. [19081.301563] ata2.00: failed command: READ DMA EXT
  558. [19081.301579] ata2.00: cmd 25/00:08:f0:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  559. [19081.301583]          res 41/04:00:f0:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  560. [19081.301590] ata2.00: status: { DRDY ERR }
  561. [19081.301595] ata2.00: error: { ABRT }
  562. [19081.315048] ata2.00: configured for UDMA/100
  563. [19081.315075] ata2: EH complete
  564. [19082.523343] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  565. [19082.523354] ata2.00: irq_stat 0x48000000
  566. [19082.523362] ata2.00: failed command: READ DMA EXT
  567. [19082.523378] ata2.00: cmd 25/00:08:f0:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  568. [19082.523381]          res 41/04:00:f0:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  569. [19082.523388] ata2.00: status: { DRDY ERR }
  570. [19082.523393] ata2.00: error: { ABRT }
  571. [19082.536791] ata2.00: configured for UDMA/100
  572. [19082.536820] ata2: EH complete
  573. [19083.090405] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  574. [19083.090416] ata2.00: irq_stat 0x48000000
  575. [19083.090424] ata2.00: failed command: READ DMA EXT
  576. [19083.090440] ata2.00: cmd 25/00:08:f0:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  577. [19083.090443]          res 41/04:00:f0:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  578. [19083.090450] ata2.00: status: { DRDY ERR }
  579. [19083.090455] ata2.00: error: { ABRT }
  580. [19083.106598] ata2.00: configured for UDMA/100
  581. [19083.106631] ata2: EH complete
  582. [19083.478736] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  583. [19083.478747] ata2.00: irq_stat 0x48000000
  584. [19083.478756] ata2.00: failed command: READ DMA EXT
  585. [19083.478772] ata2.00: cmd 25/00:08:f0:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  586. [19083.478775]          res 41/04:00:f0:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  587. [19083.478783] ata2.00: status: { DRDY ERR }
  588. [19083.478788] ata2.00: error: { ABRT }
  589. [19083.492084] ata2.00: configured for UDMA/100
  590. [19083.492115] sd 1:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  591. [19083.492124] sd 1:0:0:0: [sdc]  Sense Key : Aborted Command [current] [descriptor]
  592. [19083.492133] Descriptor sense data with sense descriptors (in hex):
  593. [19083.492138]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  594. [19083.492154]         24 9f 07 f0
  595. [19083.492162] sd 1:0:0:0: [sdc]  Add. Sense: No additional sense information
  596. [19083.492171] sd 1:0:0:0: [sdc] CDB: Read(10): 28 00 24 9f 07 f0 00 00 08 00
  597. [19083.492187] end_request: I/O error, dev sdc, sector 614402032
  598. [19083.492197] Buffer I/O error on device sdc2, logical block 76774398
  599. [19083.492346] ata2: EH complete
  600. [19083.868320] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  601. [19083.868331] ata2.00: irq_stat 0x48000000
  602. [19083.868339] ata2.00: failed command: READ DMA EXT
  603. [19083.868355] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  604. [19083.868358]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  605. [19083.868366] ata2.00: status: { DRDY ERR }
  606. [19083.868371] ata2.00: error: { ABRT }
  607. [19083.881738] ata2.00: configured for UDMA/100
  608. [19083.881771] ata2: EH complete
  609. [19084.257880] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  610. [19084.257890] ata2.00: irq_stat 0x48000000
  611. [19084.257898] ata2.00: failed command: READ DMA EXT
  612. [19084.257915] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  613. [19084.257918]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  614. [19084.257926] ata2.00: status: { DRDY ERR }
  615. [19084.257931] ata2.00: error: { ABRT }
  616. [19084.271256] ata2.00: configured for UDMA/100
  617. [19084.271287] ata2: EH complete
  618. [19084.646460] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  619. [19084.646472] ata2.00: irq_stat 0x48000000
  620. [19084.646480] ata2.00: failed command: READ DMA EXT
  621. [19084.646496] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  622. [19084.646500]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  623. [19084.646507] ata2.00: status: { DRDY ERR }
  624. [19084.646512] ata2.00: error: { ABRT }
  625. [19084.659885] ata2.00: configured for UDMA/100
  626. [19084.659917] ata2: EH complete
  627. [19085.035023] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  628. [19085.035033] ata2.00: irq_stat 0x48000000
  629. [19085.035041] ata2.00: failed command: READ DMA EXT
  630. [19085.035057] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  631. [19085.035060]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  632. [19085.035067] ata2.00: status: { DRDY ERR }
  633. [19085.035072] ata2.00: error: { ABRT }
  634. [19085.048620] ata2.00: configured for UDMA/100
  635. [19085.048648] ata2: EH complete
  636. [19085.424593] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  637. [19085.424604] ata2.00: irq_stat 0x48000000
  638. [19085.424612] ata2.00: failed command: READ DMA EXT
  639. [19085.424628] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  640. [19085.424631]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  641. [19085.424639] ata2.00: status: { DRDY ERR }
  642. [19085.424644] ata2.00: error: { ABRT }
  643. [19085.439491] ata2.00: configured for UDMA/100
  644. [19085.439519] ata2: EH complete
  645. [19085.814159] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  646. [19085.814170] ata2.00: irq_stat 0x48000000
  647. [19085.814178] ata2.00: failed command: READ DMA EXT
  648. [19085.814194] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  649. [19085.814197]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  650. [19085.814204] ata2.00: status: { DRDY ERR }
  651. [19085.814209] ata2.00: error: { ABRT }
  652. [19085.827523] ata2.00: configured for UDMA/100
  653. [19085.827557] sd 1:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  654. [19085.827566] sd 1:0:0:0: [sdc]  Sense Key : Aborted Command [current] [descriptor]
  655. [19085.827575] Descriptor sense data with sense descriptors (in hex):
  656. [19085.827580]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  657. [19085.827597]         24 9f 08 08
  658. [19085.827604] sd 1:0:0:0: [sdc]  Add. Sense: No additional sense information
  659. [19085.827614] sd 1:0:0:0: [sdc] CDB: Read(10): 28 00 24 9f 08 08 00 00 08 00
  660. [19085.827630] end_request: I/O error, dev sdc, sector 614402056
  661. [19085.827641] Buffer I/O error on device sdc3, logical block 1
  662. [19085.827679] ata2: EH complete
  663. [19087.903222] ata2.00: limiting speed to UDMA/33:PIO4
  664. [19087.903236] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
  665. [19087.903244] ata2.00: irq_stat 0x48000000
  666. [19087.903252] ata2.00: failed command: READ DMA EXT
  667. [19087.903267] ata2.00: cmd 25/00:08:f0:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  668. [19087.903270]          res 41/04:00:f0:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  669. [19087.903278] ata2.00: status: { DRDY ERR }
  670. [19087.903283] ata2.00: error: { ABRT }
  671. [19087.903295] ata2: hard resetting link
  672. [19096.008071] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
  673. [19096.015412] ata2.00: configured for UDMA/33
  674. [19096.028091] ata2: EH complete
  675. [19096.313199] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  676. [19096.313211] ata2.00: irq_stat 0x48000000
  677. [19096.313220] ata2.00: failed command: READ DMA EXT
  678. [19096.313236] ata2.00: cmd 25/00:08:f0:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  679. [19096.313239]          res 41/04:00:f0:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  680. [19096.313246] ata2.00: status: { DRDY ERR }
  681. [19096.313252] ata2.00: error: { ABRT }
  682. [19096.323539] ata2.00: configured for UDMA/33
  683. [19096.323574] ata2: EH complete
  684. [19096.733163] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  685. [19096.733174] ata2.00: irq_stat 0x48000000
  686. [19096.733182] ata2.00: failed command: READ DMA EXT
  687. [19096.733198] ata2.00: cmd 25/00:08:f0:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  688. [19096.733201]          res 41/04:00:f0:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  689. [19096.733208] ata2.00: status: { DRDY ERR }
  690. [19096.733213] ata2.00: error: { ABRT }
  691. [19096.747443] ata2.00: configured for UDMA/33
  692. [19096.747472] ata2: EH complete
  693. [19097.162791] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  694. [19097.162802] ata2.00: irq_stat 0x48000000
  695. [19097.162810] ata2.00: failed command: READ DMA EXT
  696. [19097.162826] ata2.00: cmd 25/00:08:f0:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  697. [19097.162829]          res 41/04:00:f0:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  698. [19097.162836] ata2.00: status: { DRDY ERR }
  699. [19097.162841] ata2.00: error: { ABRT }
  700. [19097.176237] ata2.00: configured for UDMA/33
  701. [19097.176267] ata2: EH complete
  702. [19097.588419] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  703. [19097.588429] ata2.00: irq_stat 0x48000000
  704. [19097.588438] ata2.00: failed command: READ DMA EXT
  705. [19097.588453] ata2.00: cmd 25/00:08:f0:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  706. [19097.588456]          res 41/04:00:f0:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  707. [19097.588464] ata2.00: status: { DRDY ERR }
  708. [19097.588469] ata2.00: error: { ABRT }
  709. [19097.601763] ata2.00: configured for UDMA/33
  710. [19097.601790] ata2: EH complete
  711. [19098.012043] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  712. [19098.012053] ata2.00: irq_stat 0x48000000
  713. [19098.012061] ata2.00: failed command: READ DMA EXT
  714. [19098.012077] ata2.00: cmd 25/00:08:f0:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  715. [19098.012080]          res 41/04:00:f0:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  716. [19098.012087] ata2.00: status: { DRDY ERR }
  717. [19098.012092] ata2.00: error: { ABRT }
  718. [19098.025456] ata2.00: configured for UDMA/33
  719. [19098.025487] sd 1:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  720. [19098.025496] sd 1:0:0:0: [sdc]  Sense Key : Aborted Command [current] [descriptor]
  721. [19098.025505] Descriptor sense data with sense descriptors (in hex):
  722. [19098.025510]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  723. [19098.025526]         24 9f 07 f0
  724. [19098.025534] sd 1:0:0:0: [sdc]  Add. Sense: No additional sense information
  725. [19098.025543] sd 1:0:0:0: [sdc] CDB: Read(10): 28 00 24 9f 07 f0 00 00 08 00
  726. [19098.025566] end_request: I/O error, dev sdc, sector 614402032
  727. [19098.025578] Buffer I/O error on device sdc2, logical block 76774398
  728. [19098.025620] ata2: EH complete
  729. [19099.252858] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  730. [19099.252869] ata2.00: irq_stat 0x48000000
  731. [19099.252877] ata2.00: failed command: READ DMA EXT
  732. [19099.252893] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  733. [19099.252896]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  734. [19099.252903] ata2.00: status: { DRDY ERR }
  735. [19099.252908] ata2.00: error: { ABRT }
  736. [19099.266317] ata2.00: configured for UDMA/33
  737. [19099.266347] ata2: EH complete
  738. [19099.704605] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  739. [19099.704617] ata2.00: irq_stat 0x48000000
  740. [19099.704625] ata2.00: failed command: READ DMA EXT
  741. [19099.704641] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  742. [19099.704645]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  743. [19099.704652] ata2.00: status: { DRDY ERR }
  744. [19099.704657] ata2.00: error: { ABRT }
  745. [19099.718425] ata2.00: configured for UDMA/33
  746. [19099.718453] ata2: EH complete
  747. [19100.201257] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  748. [19100.201268] ata2.00: irq_stat 0x48000000
  749. [19100.201276] ata2.00: failed command: READ DMA EXT
  750. [19100.201292] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  751. [19100.201295]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  752. [19100.201302] ata2.00: status: { DRDY ERR }
  753. [19100.201308] ata2.00: error: { ABRT }
  754. [19100.214698] ata2.00: configured for UDMA/33
  755. [19100.214729] ata2: EH complete
  756. [19100.663941] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  757. [19100.663952] ata2.00: irq_stat 0x48000000
  758. [19100.663961] ata2.00: failed command: READ DMA EXT
  759. [19100.663977] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  760. [19100.663980]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  761. [19100.663987] ata2.00: status: { DRDY ERR }
  762. [19100.663992] ata2.00: error: { ABRT }
  763. [19100.677884] ata2.00: configured for UDMA/33
  764. [19100.677915] ata2: EH complete
  765. [19101.241776] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  766. [19101.241786] ata2.00: irq_stat 0x48000000
  767. [19101.241794] ata2.00: failed command: READ DMA EXT
  768. [19101.241810] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  769. [19101.241813]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  770. [19101.241821] ata2.00: status: { DRDY ERR }
  771. [19101.241826] ata2.00: error: { ABRT }
  772. [19101.255226] ata2.00: configured for UDMA/33
  773. [19101.255260] ata2: EH complete
  774. [19101.708534] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  775. [19101.708545] ata2.00: irq_stat 0x48000000
  776. [19101.708553] ata2.00: failed command: READ DMA EXT
  777. [19101.708569] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  778. [19101.708572]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  779. [19101.708580] ata2.00: status: { DRDY ERR }
  780. [19101.708585] ata2.00: error: { ABRT }
  781. [19101.721823] ata2.00: configured for UDMA/33
  782. [19101.721856] sd 1:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  783. [19101.721865] sd 1:0:0:0: [sdc]  Sense Key : Aborted Command [current] [descriptor]
  784. [19101.721875] Descriptor sense data with sense descriptors (in hex):
  785. [19101.721880]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  786. [19101.721896]         24 9f 08 08
  787. [19101.721904] sd 1:0:0:0: [sdc]  Add. Sense: No additional sense information
  788. [19101.721914] sd 1:0:0:0: [sdc] CDB: Read(10): 28 00 24 9f 08 08 00 00 08 00
  789. [19101.721931] end_request: I/O error, dev sdc, sector 614402056
  790. [19101.721942] Buffer I/O error on device sdc3, logical block 1
  791. [19101.721979] ata2: EH complete
  792. [19102.161133] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  793. [19102.161144] ata2.00: irq_stat 0x48000000
  794. [19102.161152] ata2.00: failed command: READ DMA EXT
  795. [19102.161167] ata2.00: cmd 25/00:08:f8:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  796. [19102.161171]          res 41/04:00:f8:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  797. [19102.161178] ata2.00: status: { DRDY ERR }
  798. [19102.161183] ata2.00: error: { ABRT }
  799. [19102.174537] ata2.00: configured for UDMA/33
  800. [19102.174566] ata2: EH complete
  801. [19102.612789] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  802. [19102.612800] ata2.00: irq_stat 0x48000000
  803. [19102.612809] ata2.00: failed command: READ DMA EXT
  804. [19102.612825] ata2.00: cmd 25/00:08:f8:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  805. [19102.612828]          res 41/04:00:f8:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  806. [19102.612841] ata2.00: status: { DRDY ERR }
  807. [19102.612847] ata2.00: error: { ABRT }
  808. [19102.626130] ata2.00: configured for UDMA/33
  809. [19102.626158] ata2: EH complete
  810. [19103.053437] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  811. [19103.053487] ata2.00: irq_stat 0x48000000
  812. [19103.053496] ata2.00: failed command: READ DMA EXT
  813. [19103.053511] ata2.00: cmd 25/00:08:f8:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  814. [19103.053514]          res 41/04:00:f8:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  815. [19103.053522] ata2.00: status: { DRDY ERR }
  816. [19103.053527] ata2.00: error: { ABRT }
  817. [19103.066854] ata2.00: configured for UDMA/33
  818. [19103.066880] ata2: EH complete
  819. [19103.495078] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  820. [19103.495089] ata2.00: irq_stat 0x48000000
  821. [19103.495097] ata2.00: failed command: READ DMA EXT
  822. [19103.495112] ata2.00: cmd 25/00:08:f8:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  823. [19103.495115]          res 41/04:00:f8:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  824. [19103.495123] ata2.00: status: { DRDY ERR }
  825. [19103.495128] ata2.00: error: { ABRT }
  826. [19103.508420] ata2.00: configured for UDMA/33
  827. [19103.508447] ata2: EH complete
  828. [19103.935721] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  829. [19103.935731] ata2.00: irq_stat 0x48000000
  830. [19103.935739] ata2.00: failed command: READ DMA EXT
  831. [19103.935754] ata2.00: cmd 25/00:08:f8:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  832. [19103.935757]          res 41/04:00:f8:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  833. [19103.935764] ata2.00: status: { DRDY ERR }
  834. [19103.935769] ata2.00: error: { ABRT }
  835. [19103.949158] ata2.00: configured for UDMA/33
  836. [19103.949189] ata2: EH complete
  837. [19104.376423] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  838. [19104.376433] ata2.00: irq_stat 0x48000000
  839. [19104.376441] ata2.00: failed command: READ DMA EXT
  840. [19104.376457] ata2.00: cmd 25/00:08:f8:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  841. [19104.376460]          res 41/04:00:f8:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  842. [19104.376468] ata2.00: status: { DRDY ERR }
  843. [19104.376473] ata2.00: error: { ABRT }
  844. [19104.389700] ata2.00: configured for UDMA/33
  845. [19104.389723] sd 1:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  846. [19104.389732] sd 1:0:0:0: [sdc]  Sense Key : Aborted Command [current] [descriptor]
  847. [19104.389742] Descriptor sense data with sense descriptors (in hex):
  848. [19104.389746]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  849. [19104.389763]         24 9f 07 f8
  850. [19104.389771] sd 1:0:0:0: [sdc]  Add. Sense: No additional sense information
  851. [19104.389780] sd 1:0:0:0: [sdc] CDB: Read(10): 28 00 24 9f 07 f8 00 00 08 00
  852. [19104.389796] end_request: I/O error, dev sdc, sector 614402040
  853. [19104.389806] Buffer I/O error on device sdc2, logical block 76774399
  854. [19104.389830] ata2: EH complete
  855. [19104.818070] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  856. [19104.818081] ata2.00: irq_stat 0x48000000
  857. [19104.818089] ata2.00: failed command: READ DMA EXT
  858. [19104.818105] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  859. [19104.818108]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  860. [19104.818116] ata2.00: status: { DRDY ERR }
  861. [19104.818121] ata2.00: error: { ABRT }
  862. [19104.831453] ata2.00: configured for UDMA/33
  863. [19104.831483] ata2: EH complete
  864. [19105.254700] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  865. [19105.254710] ata2.00: irq_stat 0x48000000
  866. [19105.254719] ata2.00: failed command: READ DMA EXT
  867. [19105.254734] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  868. [19105.254737]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  869. [19105.254744] ata2.00: status: { DRDY ERR }
  870. [19105.254749] ata2.00: error: { ABRT }
  871. [19105.268169] ata2.00: configured for UDMA/33
  872. [19105.268198] ata2: EH complete
  873. [19105.696360] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  874. [19105.696371] ata2.00: irq_stat 0x48000000
  875. [19105.696379] ata2.00: failed command: READ DMA EXT
  876. [19105.696395] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  877. [19105.696398]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  878. [19105.696405] ata2.00: status: { DRDY ERR }
  879. [19105.696410] ata2.00: error: { ABRT }
  880. [19105.709731] ata2.00: configured for UDMA/33
  881. [19105.709758] ata2: EH complete
  882. [19106.587252] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  883. [19106.587263] ata2.00: irq_stat 0x48000000
  884. [19106.587271] ata2.00: failed command: READ DMA EXT
  885. [19106.587288] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  886. [19106.587291]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  887. [19106.587298] ata2.00: status: { DRDY ERR }
  888. [19106.587303] ata2.00: error: { ABRT }
  889. [19106.599210] ata2.00: configured for UDMA/33
  890. [19106.599239] ata2: EH complete
  891. [19107.030305] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  892. [19107.030316] ata2.00: irq_stat 0x48000000
  893. [19107.030324] ata2.00: failed command: READ DMA EXT
  894. [19107.030340] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  895. [19107.030343]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  896. [19107.030350] ata2.00: status: { DRDY ERR }
  897. [19107.030355] ata2.00: error: { ABRT }
  898. [19107.043687] ata2.00: configured for UDMA/33
  899. [19107.043709] ata2: EH complete
  900. [19107.471032] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  901. [19107.471042] ata2.00: irq_stat 0x48000000
  902. [19107.471050] ata2.00: failed command: READ DMA EXT
  903. [19107.471066] ata2.00: cmd 25/00:08:08:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  904. [19107.471069]          res 41/04:00:08:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  905. [19107.471077] ata2.00: status: { DRDY ERR }
  906. [19107.471088] ata2.00: error: { ABRT }
  907. [19107.484273] ata2.00: configured for UDMA/33
  908. [19107.484311] sd 1:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  909. [19107.484321] sd 1:0:0:0: [sdc]  Sense Key : Aborted Command [current] [descriptor]
  910. [19107.484330] Descriptor sense data with sense descriptors (in hex):
  911. [19107.484335]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  912. [19107.484351]         24 9f 08 08
  913. [19107.484359] sd 1:0:0:0: [sdc]  Add. Sense: No additional sense information
  914. [19107.484368] sd 1:0:0:0: [sdc] CDB: Read(10): 28 00 24 9f 08 08 00 00 08 00
  915. [19107.484385] end_request: I/O error, dev sdc, sector 614402056
  916. [19107.484396] Buffer I/O error on device sdc3, logical block 1
  917. [19107.484443] ata2: EH complete
  918. [19108.198019] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  919. [19108.198029] ata2.00: irq_stat 0x48000000
  920. [19108.198038] ata2.00: failed command: READ DMA EXT
  921. [19108.198053] ata2.00: cmd 25/00:08:f8:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  922. [19108.198056]          res 41/04:00:f8:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  923. [19108.198064] ata2.00: status: { DRDY ERR }
  924. [19108.198069] ata2.00: error: { ABRT }
  925. [19108.211328] ata2.00: configured for UDMA/33
  926. [19108.211355] ata2: EH complete
  927. [19108.953129] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  928. [19108.953140] ata2.00: irq_stat 0x48000000
  929. [19108.953149] ata2.00: failed command: READ DMA EXT
  930. [19108.953164] ata2.00: cmd 25/00:08:f8:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  931. [19108.953168]          res 41/04:00:f8:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  932. [19108.953175] ata2.00: status: { DRDY ERR }
  933. [19108.953180] ata2.00: error: { ABRT }
  934. [19108.966572] ata2.00: configured for UDMA/33
  935. [19108.966606] ata2: EH complete
  936. [19109.331682] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  937. [19109.331693] ata2.00: irq_stat 0x48000000
  938. [19109.331702] ata2.00: failed command: READ DMA EXT
  939. [19109.331717] ata2.00: cmd 25/00:08:f8:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  940. [19109.331721]          res 41/04:00:f8:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  941. [19109.331728] ata2.00: status: { DRDY ERR }
  942. [19109.331733] ata2.00: error: { ABRT }
  943. [19109.344976] ata2.00: configured for UDMA/33
  944. [19109.345001] ata2: EH complete
  945. [19109.720260] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  946. [19109.720271] ata2.00: irq_stat 0x48000000
  947. [19109.720279] ata2.00: failed command: READ DMA EXT
  948. [19109.720295] ata2.00: cmd 25/00:08:f8:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  949. [19109.720299]          res 41/04:00:f8:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  950. [19109.720306] ata2.00: status: { DRDY ERR }
  951. [19109.720311] ata2.00: error: { ABRT }
  952. [19109.734021] ata2.00: configured for UDMA/33
  953. [19109.734047] ata2: EH complete
  954. [19110.110106] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  955. [19110.110117] ata2.00: irq_stat 0x48000000
  956. [19110.110125] ata2.00: failed command: READ DMA EXT
  957. [19110.110141] ata2.00: cmd 25/00:08:f8:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  958. [19110.110145]          res 41/04:00:f8:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  959. [19110.110152] ata2.00: status: { DRDY ERR }
  960. [19110.110157] ata2.00: error: { ABRT }
  961. [19110.123215] ata2.00: configured for UDMA/33
  962. [19110.123244] ata2: EH complete
  963. [19110.498390] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  964. [19110.498401] ata2.00: irq_stat 0x48000000
  965. [19110.498409] ata2.00: failed command: READ DMA EXT
  966. [19110.498425] ata2.00: cmd 25/00:08:f8:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  967. [19110.498428]          res 41/04:00:f8:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  968. [19110.498435] ata2.00: status: { DRDY ERR }
  969. [19110.498440] ata2.00: error: { ABRT }
  970. [19110.511828] ata2.00: configured for UDMA/33
  971. [19110.511862] sd 1:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  972. [19110.511870] sd 1:0:0:0: [sdc]  Sense Key : Aborted Command [current] [descriptor]
  973. [19110.511880] Descriptor sense data with sense descriptors (in hex):
  974. [19110.511884]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  975. [19110.511900]         24 9f 07 f8
  976. [19110.511908] sd 1:0:0:0: [sdc]  Add. Sense: No additional sense information
  977. [19110.511917] sd 1:0:0:0: [sdc] CDB: Read(10): 28 00 24 9f 07 f8 00 00 08 00
  978. [19110.511933] end_request: I/O error, dev sdc, sector 614402040
  979. [19110.511944] Buffer I/O error on device sdc2, logical block 76774399
  980. [19110.511984] ata2: EH complete
  981. [19110.883954] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  982. [19110.883964] ata2.00: irq_stat 0x48000000
  983. [19110.883973] ata2.00: failed command: READ DMA EXT
  984. [19110.883989] ata2.00: cmd 25/00:08:00:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  985. [19110.883992]          res 41/04:00:00:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  986. [19110.883999] ata2.00: status: { DRDY ERR }
  987. [19110.884036] ata2.00: error: { ABRT }
  988. [19110.897255] ata2.00: configured for UDMA/33
  989. [19110.897283] ata2: EH complete
  990. [19111.265517] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  991. [19111.265527] ata2.00: irq_stat 0x48000000
  992. [19111.265535] ata2.00: failed command: READ DMA EXT
  993. [19111.265551] ata2.00: cmd 25/00:08:00:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  994. [19111.265554]          res 41/04:00:00:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  995. [19111.265561] ata2.00: status: { DRDY ERR }
  996. [19111.265567] ata2.00: error: { ABRT }
  997. [19111.278910] ata2.00: configured for UDMA/33
  998. [19111.278936] ata2: EH complete
  999. [19111.650043] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  1000. [19111.650047] ata2.00: irq_stat 0x48000000
  1001. [19111.650051] ata2.00: failed command: READ DMA EXT
  1002. [19111.650056] ata2.00: cmd 25/00:08:00:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  1003. [19111.650057]          res 41/04:00:00:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  1004. [19111.650060] ata2.00: status: { DRDY ERR }
  1005. [19111.650062] ata2.00: error: { ABRT }
  1006. [19111.663349] ata2.00: configured for UDMA/33
  1007. [19111.663361] ata2: EH complete
  1008. [19112.032647] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  1009. [19112.032666] ata2.00: irq_stat 0x48000000
  1010. [19112.032675] ata2.00: failed command: READ DMA EXT
  1011. [19112.032690] ata2.00: cmd 25/00:08:00:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  1012. [19112.032694]          res 41/04:00:00:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  1013. [19112.032701] ata2.00: status: { DRDY ERR }
  1014. [19112.032706] ata2.00: error: { ABRT }
  1015. [19112.046148] ata2.00: configured for UDMA/33
  1016. [19112.046175] ata2: EH complete
  1017. [19112.417204] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  1018. [19112.417214] ata2.00: irq_stat 0x48000000
  1019. [19112.417222] ata2.00: failed command: READ DMA EXT
  1020. [19112.417238] ata2.00: cmd 25/00:08:00:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  1021. [19112.417241]          res 41/04:00:00:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  1022. [19112.417249] ata2.00: status: { DRDY ERR }
  1023. [19112.417254] ata2.00: error: { ABRT }
  1024. [19112.430577] ata2.00: configured for UDMA/33
  1025. [19112.430604] ata2: EH complete
  1026. [19112.799765] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  1027. [19112.799776] ata2.00: irq_stat 0x48000000
  1028. [19112.799785] ata2.00: failed command: READ DMA EXT
  1029. [19112.799800] ata2.00: cmd 25/00:08:00:08:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  1030. [19112.799804]          res 41/04:00:00:08:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  1031. [19112.799811] ata2.00: status: { DRDY ERR }
  1032. [19112.799816] ata2.00: error: { ABRT }
  1033. [19112.813226] ata2.00: configured for UDMA/33
  1034. [19112.813259] sd 1:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1035. [19112.813268] sd 1:0:0:0: [sdc]  Sense Key : Aborted Command [current] [descriptor]
  1036. [19112.813277] Descriptor sense data with sense descriptors (in hex):
  1037. [19112.813282]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
  1038. [19112.813303]         24 9f 08 00
  1039. [19112.813311] sd 1:0:0:0: [sdc]  Add. Sense: No additional sense information
  1040. [19112.813320] sd 1:0:0:0: [sdc] CDB: Read(10): 28 00 24 9f 08 00 00 00 08 00
  1041. [19112.813343] end_request: I/O error, dev sdc, sector 614402048
  1042. [19112.813354] Buffer I/O error on device sdc3, logical block 0
  1043. [19112.813395] ata2: EH complete
  1044. [19116.045522] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  1045. [19116.045532] ata2.00: irq_stat 0x48000000
  1046. [19116.045540] ata2.00: failed command: READ DMA EXT
  1047. [19116.045556] ata2.00: cmd 25/00:08:f8:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  1048. [19116.045559]          res 41/04:00:f8:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  1049. [19116.045604] ata2.00: status: { DRDY ERR }
  1050. [19116.045609] ata2.00: error: { ABRT }
  1051. [19116.058936] ata2.00: configured for UDMA/33
  1052. [19116.058965] ata2: EH complete
  1053. [19116.434096] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  1054. [19116.434106] ata2.00: irq_stat 0x48000000
  1055. [19116.434115] ata2.00: failed command: READ DMA EXT
  1056. [19116.434130] ata2.00: cmd 25/00:08:f8:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  1057. [19116.434134]          res 41/04:00:f8:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  1058. [19116.434141] ata2.00: status: { DRDY ERR }
  1059. [19116.434146] ata2.00: error: { ABRT }
  1060. [19116.447455] ata2.00: configured for UDMA/33
  1061. [19116.447485] ata2: EH complete
  1062. [19116.822662] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  1063. [19116.822672] ata2.00: irq_stat 0x48000000
  1064. [19116.822680] ata2.00: failed command: READ DMA EXT
  1065. [19116.822696] ata2.00: cmd 25/00:08:f8:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  1066. [19116.822700]          res 41/04:00:f8:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  1067. [19116.822707] ata2.00: status: { DRDY ERR }
  1068. [19116.822712] ata2.00: error: { ABRT }
  1069. [19116.836053] ata2.00: configured for UDMA/33
  1070. [19116.836078] ata2: EH complete
  1071. [19117.208218] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  1072. [19117.208229] ata2.00: irq_stat 0x48000000
  1073. [19117.208237] ata2.00: failed command: READ DMA EXT
  1074. [19117.208252] ata2.00: cmd 25/00:08:f8:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  1075. [19117.208256]          res 41/04:00:f8:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  1076. [19117.208263] ata2.00: status: { DRDY ERR }
  1077. [19117.208268] ata2.00: error: { ABRT }
  1078. [19117.221565] ata2.00: configured for UDMA/33
  1079. [19117.221596] ata2: EH complete
  1080. [19117.599492] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  1081. [19117.599503] ata2.00: irq_stat 0x48000000
  1082. [19117.599511] ata2.00: failed command: READ DMA EXT
  1083. [19117.599527] ata2.00: cmd 25/00:08:f8:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  1084. [19117.599531]          res 41/04:00:f8:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  1085. [19117.599538] ata2.00: status: { DRDY ERR }
  1086. [19117.599543] ata2.00: error: { ABRT }
  1087. [19117.611179] ata2.00: configured for UDMA/33
  1088. [19117.611202] ata2: EH complete
  1089. [19117.986370] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
  1090. [19117.986380] ata2.00: irq_stat 0x48000000
  1091. [19117.986388] ata2.00: failed command: READ DMA EXT
  1092. [19117.986405] ata2.00: cmd 25/00:08:f8:07:9f/00:00:24:00:00/e0 tag 0 dma 4096 in
  1093. [19117.986408]          res 41/04:00:f8:07:9f/00:00:24:00:00/e0 Emask 0x1 (device error)
  1094. [19117.986415] ata2.00: status: { DRDY ERR }
  1095. [19117.986420] ata2.00: error: { ABRT }
  1096. [19117.999672] ata2.00: configured for UDMA/33
  1097. [19117.999701] sd 1:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
  1098. [19117.999710] sd 1:0:0:0: [sdc]  Sense Key : Aborted Command [current] [descriptor]
  1099. [19117.999720] Descriptor sense data with sense descriptors (in hex):
  1100. [19117.999725]         72

Źródło:

Ostatnie wpisy

Linki

Funkcje